Monolinks are small manifolds which enable connections to be made simply and effectively to fan coil and air handling units. They each include a full-bore bypass which significantly reduces commissioning time.
Each Monolink module is supplied as a single assembly and is connected to its terminal unit by just four unions, making it easy to fit and adjust in situ. Monolink design can be static (with flow established by commissioning set) or dynamic (where flow is controlled by a pressure independent control valve).
Each flow side isolation valve comes with an integral strainer, which can be removed and cleaned without having to drain down the whole system. A drain point is provided to assist with maintenance. Monolinks are assembled and tested hydraulically at works, giving time savings to the contractor.