Monolinks enable connections to be made simply and effectively to fan coil and air handling units. They include full-bore bypass flushing facilities, which significantly reduce commissioning time.
Each Monolink module is supplied as a single assembly and is connected up to its terminal unit by just four unions, making it very easy to fit and adjust in situ. Monolink design can be static (with flow established by commissioning set) or dynamic (where flow is controlled by a pressure independent control valve).
Each flow side isolation valve comes with an integral strainer, which can be removed and cleaned without having to drain down the whole system. A drain point is provided to assist with maintenance.
Monolinks are assembled and tested hydraulically at works, raising the bar in terms of quality and reducing site time required to connect up each terminal unit. They can be supplied up to PN 25.